News
Events
View All

Subscribe Newsletter


Watch video

SMA Piccolo 51 Mircofilm Scanner

Processor for 16 and 35 mm Microfilm

This easy-to-use desktop processor operates on a time-tested principle. The SI PICCOLO 51 is suitable for development of 16 mm microfilm as well as for 35 mm microfilm application by replacing the rack. After inserting the exposed 16 mm film into the film cassette, the end of the film is tracked directly into the rack.
 
The film goes through the chemical baths with a run time of up to 1 m per minute in flat bed method and can be threaded and wound up into the take-up spool after about 30 seconds. The SI PICCOLO 51 does not require a water supply or a connection to the wastewater. Only connect the chemical bottles from the piccolo chemical set for developing.
 
With regard to the archival capability (residual thiosulfate) it is recommended to use the piccolo chemical set, which is specially produced for this processor. With one liter of piccolo chemicals the processor develops six to eight 16 mm films or three to four 35 mm films. The chemical temperature from 28°C to 38°C - as well as the running speed and the drying temperature are adjustable.
 
The SI PICCOLO 51 has a very low power consumption. In the heating phase it consumes 800 W and in stand-by around 200 W.
Download Brochure
Adv Banner

Copyright © 2019 ForeFront Technologies.All rights reserved          Powered by Efforts Solutions
Copyright © 2019 ForeFront Technologies.All rights reserved
Powered by Efforts Solutions